Smok Alien AL85w Kit
Building on the success of the Alien Kit, Smok introduce the Baby Alien AL85 kit. Featuring 85W of power and temperature control, this kit truly is the little brother to the larger Alien kit.
- Size: 71x48x27mm
- Weight: 120g
- Power Range: 1-85 Watts
- Voltage Range: 0.35V - 8.0V
- Resistance Range: 0.1 - 3.0 ohm Wattage Mode/0.06-3.00 ohms TC Mode
- Temperature Range: 200-600 Fahrenheit
- 1 x AL85 Mod
- 1 x SMOK TFV8 Baby Beast Tank
- 1 x V8 Baby-Q2 Corre(0.4Ω dual coils)(pre-installed)
- 1 x V8 Baby-Q2 Corre(0.6Ω dual coils)
- 1 x USB Charge/Upgrade Cable
- 1 x User Manual
- Spare Parts
- Baby-T8 Octuple Core
- Baby-T6 Sextuple Core
- Baby-X4 Quadruple Core
- Baby-Q2 Dual Core
- Baby RBA Coil
It is better to charge the cells through an external charger but you can also charge the device via the USB cable, by connecting it with a computer or a wall adapter rated as 1A.
Please note, this device requires 1 x 18650 battery as a power source, which will need to be purchased separately. These can be found here , Liberty Flights recommend the Samsung or Sony 18650 batteries as the discharging current should be above 25A.
Please make sure that your batteries can handle low resistance before using this tank. They must be able to handle 0.5Ohm and lower to safely operate. Due to the low resistances, we recommend this product for advanced users with a good knowledge of battery safety.
When using the sub-ohm coils (below 1 ohm), we advise that you decrease your nicotine level as a sub-ohm vape is more efficient and vaporises more e-liquid per draw. We recommend using a 0%, 0.3% or 0.6% w/v nicotine e-liquid in a 50-50 or VG heavy base. While you can sub-ohm with higher nicotine levels, most vapers will find the throat hit too harsh.
To use the temperature control feature (TC), it will require the use of nickel, titanium, or stainless steel coils (non-resistant wire).
Black & Red