Aspire are very proud to announce our first venture into the Squonk market with the outstanding Aspire Feedlink Revvo Boost Kit.
The Feedlink is a bypass firing, single 18650 powered squonk mod that contains all the safety features you would expect from Aspire. The Quality of the mod is outstanding and feels exceptional in the hand. It’s almost pistol grip feels very ergonomical and the operation of the squonk and the firing can all be operated using one hand. The Aspire Feedlink Revvo boost is an absolute joy to hold and use. This is a game changer in terms of Squonk to Tank Kits.
Speaking of Tanks, the kit features the Revvo Boost tank which is a slightly tweaked version of the popular Revvo tank launched earlier this year. It uses slightly different Revvo Boost coils to further enhance flavour and to perfectly perform as a squonker. The tank itself is equipped with a squonk pin which means no more filling the tank as per usual. Simple squeeze the squonk bottle and watch as the tank fills itself.
The Tank is 2ml TPD compliant, but this isn’t an issue when you have a squonk bottle attached ready to fill your tank on the fly in seconds with a simple squeeze.
Voltage range 3.0-4.2V output
2ml Tank Capacity
7ml Silicone squonk bottle capacity
Mod Size with Tank: 124 x 48 x 30mm
Easy to fill
Requires 1 x 18650 Battery (Not Included)
Wide bore delrin drip tip
Sping loaded 510 connector
1 x Aspire Feedlink Squonk Mod
1 x Aspire Revvo Boost Tank 2ml
2 x Aspire ARC Boost Coils (0.10-0.14 ohm)
1 x Replacement Glass
1 x Bag of o-rings
2 x Aspire Warning Cards
12 x O-rings
1 x Warranty Card
1 x User Manual
How to fill the squonk bottle: Such a simple yet beautiful system. Remove the bottle from the carrier, unscrew the metal top cap feeder and feeder tube and fill with e liquid. Max capacity is 7ml in the squonk bottle. Replace the top cap feeder and screw everything tightly back together before reinserting back to the carrier.
When using the sub-ohm coils (below 1 ohm), we advise that you decrease your nicotine level as a sub-ohm vape is more efficient and vaporises more e-liquid per draw. We recommend using a 0%, 0.3% or 0.6% w/v nicotine e-liquid in a VG heavy base. While you can sub-ohm with higher nicotine levels, most vapers will find the throat hit too harsh.
You must charge the cells through an external charger as there is no USB cable with this device. Please note, this device requires 1 x 18650 batteries as a power source, which will need to be purchased separately. These can be found here , Liberty Flights recommend the Samsung or Sony 18650 batteries as the discharging current should be above 25A. Always keep any loose batteries in a battery case to protect them against wear and tear and potential battery discharging. Due to the low resistances, we recommend this product for advanced users with a good knowledge of battery safety.