Aspire brings you the all new, just as curvy, Nautilus 2S Tank. The new Nautilus 2S tank is a 2ml TPD compliant tank and is equipped with a 0.4ohm BVC coil for direct to lung vaping and a 1.8ohm BVC coil for mouth to lung vaping. Featuring a top-fill child resistant design with a silicone self-seal system that helps with leak free filling. The coils are also interchangeable with other Nautilus coils.
Features Adjustable Airflow Leak Proof Child resistant 2ml Tank capacity Size: 25mm x 52mm Stainless Steel
Contents 1 x Nautilus 2S tank (Pre-installed a 1.8ohm coil) 1 x 0.4ohm BVC coil 1 x Extra drip tip 10 x O-rings 1 x User Manual 1 x Warning Card
Refilling the Nautilus 2S tank: Unscrew the top cap anti-clockwise a few turns, place your thumb on the top cap above the indicator spot and push away from you, this will reveal the filling slot. Push your e-liquid bottle tip down through the larger of the holes in the self-sealing silicon filling slot. Once filled, slide the top cap back into place and screw the top cap back down.
Coil installation: Invert the tank and unscrew to remove the base section. Push down the child-proof mechanism and unscrew to disengage the child-proof coil component. Detach the used coil and replace it with a new one then insert the child-proof coil component into the tank and push down and screw in to relocate the child-proof coil component. Screw the base section back to the tank. Note: when installing a new coil, let the tanks stand for 5 minutes after filling to allow the cotton to fully saturate with e-liquid to prevent damage to the coil and /or burning the wicking material.