Joytech eVic VTC Dual features two replaceable back covers to give you the option of using one or two battery cells. This means that the maximum output can reach up to 75W with one cell and up to 150W with dual cells. It comes with the single cell cover attached but it’s simple to replace to the dual cover, by sliding off the back cover off and inserting the battery cell into the dual cover, then click this back onto the mod body.
The eVic VTC Dual also features a large OLED screen with Real Time Clock (RTC) display and supports VW/VT/Bypass/TCR modes.
It features an Onboard Reverse Polarity Protection to protect the device from damage in the event of reverse battery installation and utilizes two sets of battery protection circuit systems that gives you overall battery protection from over-charging/discharging.
Want to upgrade the firmware, not a problem, the eVic can upload the latest Version 4.02 which gives you a new interface, multiple modes and other function.
It has a stainless steel 510 thread with spring connector, making the mod compatible with most tanks on the market.
1 * eVic VTC Dual Battery 75-150w Mod (Black)
1 * Dual Back Cover (for 1 cell)
1 * USB Cable (for charging and upgrading)
1 * User Manual
1 * Warranty Card
1 * Warning Card
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes
Output Wattage: 1-75W (one cell) /150W (two cells)
Resistance Range: 0.05-1.5ohm for VT/TCR mode and 0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Size: 23mm X 38mm X 86mm (one cell) and 23mm X 55.5mm X 86mm (one cell)
Please note, this device requires 1 or 2 x 18650 batteries as a power source, these can be found here , Liberty Flights recommend the Samsung or Sony 18650 batteries.