Aspire Cygnet 80W Mod By Aspire
Introducing the new Aspire Cygnet mod, powered by a single replaceable 18650 battery, and a maximum wattage output of 80W. It is a highly portable mod that supports Variable Voltage, Variable Wattage and Bypass modes. It's simple in design and has a fire button, 2 adjustment buttons combined to make navigating the mod super easy.
The cygnet has three modes of use, Variable Wattage (1-80w), Variable Voltage (0.5-8v), and Bypass. The Cygnet will fire at resistances between 0.1 and 3.5ohms. It uses a single replaceable 18650 battery (not included) which should be of the high rate discharge type. It has an easy to read 0.86 inch OLED screen and a micro USB charging port.
Size: 72mm (H) x 23.5mm (D) x 45mm (W)
Wattage Range: 1-80W
Output Voltage: 0.5-8.0V
Resistance Range: 0.1-3.5Ohm
0.86 inch OLED Screen
Short Circuit Protection
Uses a 18650 battery (not included)
Variable Voltage, Variable Wattage and Bypass modes
1 x Aspire Cygnet Mod
1 x USB Cable
1 x User Manual
You can charge this mod using the supplied USB charging cable, and plugged into a 5v 1A USB. Most common USBs can be found on computers and laptops or the Liberty Flights wall adapter found HERE . Other brand USB adapters or mobile phone/ tablet adapters must NOT be used. It is better to charge the batteries through an external charger, to be purchased separately. If you require batteries (not included), Liberty Flights recommends using Samsung or Sony 18650 batteries as the discharging current should be above 25A. Always keep any loose batteries in a battery case to protect them against wear and tear and potential battery discharging.