E-Cig Electronics

This eGo electronics set is ideal for you to build up your own eGo battery mods. It consists of a piece of electronics IC board, a manual button and a plastic holder. It is a perfect match for eGo battery connectors! Please note, the manual button is different from that of the Joye eGo manual battery, it does now come with 5-click protection.

Power Supply

3.7v, 280mAh li-ion battery (4.2v fully charged)

Working Parameters

Static current: <5uA, 2 uA typical
Working current: <1.1A (when Heating coil Resistance is 3Ω)
Maximum allowed working current: 2.2A
Voltage to trigger charging: <=3.2V
Voltage to stop charging: >=4.2V

Operation

LED flashes for 5 times(250ms on/250ms off), total of 2.5s, then it goes to power-saving mode.

Inhaling time : 30s: LED flashes for 16 times(200ms on/200ms off), total of 6.4s, it doesn't support inhaling during this time.

Inhaling : 1500puffs after resetting: LED flashes for 50 times(200ms on/200ms off), totally 20s, it doesn't support inhaling during this time. It burns the e-liquid for 8 second automatically to clean the atomizing chamber.